|
|
Black Hosetail 1.5" Glue Fit
|
| |
|
|
The Fittings Above And Below and Can Fit Together As Illustrated
|
| |
Demountable 1.5"
Used for connecting anything you wish to detach at a later date.
|
Black Hosetail 1.5" Glue Fit Inner
Black Hosetail 1.5" Fits inside this fitting
|
| |
2" Multipurpose Hose Tail
2 inch Multipurpose hose tail
Threaded end fits:
1.5" male BSP Thread (Internally)
2" Solvent Weld Sockets (Externally)
Hose Tail end fits:
2" (50mm) Flexible pipe (Externally)
43 mm Solvent Weld (Internally)
|
|
| |
2" 45`s Solvent
Used for outlet for all kockney koi black box filters.
|
1.5" 45`s Solvent
Used for inlet for all kockney koi black box filters.
|
| |
|
|
2" 90's Solvent
Used for outlet for all kockney koi black box filters.
|
| |
1.5" 90's Solvent
Used for outlet for all kockney koi black box filters.
|
|
| |
SOLVENT PUSHFIT 3" ST CON - 90MM OD
|
|
| |
|
|
SOLVENT WELD PIPE 4"
1 MTR LGTH
|
| |
SOLVENT WELD PIPE 3"
1 MTR LGTH
|
SOLVENT WELD PIPE 2"
1 MTR LGTH
|
| |
SOLVENT WELD PIPE 1.5"
1 MTR LGTH
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
Tank/Liner Connector 40mm ID
|
| |
Tank/Liner Connector 1.5" ID 50mm OD
|
Tank/Liner Connector 2" ID 63mm OD
|
| |
Tank/Liner Connector 3" ID 90mm OD
|
Tank/Liner Connector 4" ID 110mm OD
|
| |
AIR STORM VENTURI COMPLETE WITH D CUP
The Yamitsu AirStorm Venturi adds additional oxygen into your pond water by drawing air in to the unit and mixing it with the pond water passing through it. It does not have any moving parts as it uses the venturi effect to draw air in.
The Air Stom is supplied with two different size water nozzels each providing different aeration levels depending on pumped volume of water.
The unit has a unique "see through" design to enable you to see which nozzle works best for you. It is supplied with a demountable coupling to ease instalation and chaning of the air nozzle.
The unit should be installed below the water level. The depth is dependent on the power of your pump. This is usually between 200 mm and 1,000 mm.
|
